Benefits of Using Firefree 88: Intumescent Fire Retardant Paint

Fire protection is an essential part of modern construction, and selecting the right coating can make a significant difference in meeting fire safety requirements. Firefree 88 is a premium Fire Resistant Coating developed to comply with fire performance standards prescribed by the International Building Code (IBC). This Intumescent Fire Retardant Paint has been extensively tested under recognized fire-resistance standards, including ASTM E119, FM 4470 (NFPA 276), FM 4975, ASTM E814, BS 476, AS 1530.3, AS 1530.4, EN 13501-1, and ASTM E84 with Room Corner Test standards such as UBC 8-2, NFPA 286, and UBC 26-3.

In addition to comprehensive testing, Ff88 is listed and labeled by FM Approvals, listed and inspected by the International Code Council (ICC), classified by Underwriters Laboratories (UL), and accepted by the New York Material and Equipment Acceptance Division (MEA), providing confidence in its tested performance.

Cost-Efficient Protection

One of the biggest advantages of Firefree 88 is its cost efficiency. Thanks to its high fire-resistant performance, only a relatively thin application is required to achieve the desired protection. This helps reduce both material usage and labor costs. Depending on the project, including retrofits, historical restorations, defective construction, new construction, or transportation applications, significant savings of 30% to 70% or more may be achieved.

High Fire Performance

As an advanced Intumescent Fire Retardant Paint, the coating creates a protective barrier when exposed to high temperatures. Testing has demonstrated that Ff88 can withstand temperatures of up to 2,000°F for as long as two hours. This level of performance helps contain fire within its area of origin, limits smoke propagation, and assists in preserving structural integrity during fire exposure.

Fully Tested and Certified

The coating has undergone extensive testing to internationally recognized fire standards, including ASTM E119, FM 4975, FM 4470, ASTM E662-97, ASTM E3675-98, ASTM E162-98, ASTM E1354-94, ASTM E814, ASTM E84, Room Corner Test standards, BS 476, AS 1530.3, AS 1530.4, EN 13501, and SISIR door testing standards.

It is also listed by FM Approvals, inspected by the International Code Council, classified by Underwriters Laboratories, and accepted by the New York MEA, demonstrating compliance with multiple recognized fire safety requirements.

Suitable for Multiple Substrates

This Fire Resistant Coating is designed for use on a wide variety of construction and transportation materials. Compatible substrates include wood, gypsum board, plaster, concrete, masonry, embossed metal, galvanized steel, aluminum, spray polyurethane foam (SPF), fiberglass, carbon fiber, plastics, and other composite materials. For exterior applications, the coating may be used when protected with the Firefree Exterior (FfE) Topcoat.

Easy to Apply

The coating is a high-quality, water-based, non-toxic product with a smooth architectural-grade white matte finish. It offers excellent adhesion and durability while remaining easy to apply using a brush, roller, or sprayer. In many applications, a separate primer is not required, helping reduce installation time and overall project costs. The coating is also low-odor and can be tinted when needed.

Eco-Friendly and Sustainable

This Intumescent Fire Retardant Paint is formulated with low VOC levels of less than 36 grams per liter, well below current EPA regulations of 250 grams per liter and California's 50 grams per liter limit. Its nonflammable, non-toxic, and environmentally friendly formulation supports sustainable construction practices. In addition, it qualifies for LEED v4, is Green Categorized under FM Approvals, and meets Green Standards Performance under MPI GPS-01 and GPS-02.

Trusted by Architects and Contractors

Architects and contractors choose Ff88 because it combines tested fire performance with practical application benefits. Its extensive certifications, compatibility with multiple substrates, and easy application make it suitable for a wide range of residential, commercial, industrial, and transportation projects. Whether specified during the design phase or applied during construction, this coating helps professionals meet fire safety requirements while maintaining project efficiency and long-term performance.

Conclusion

Whether used for new construction, renovations, or transportation projects, this coating combines proven fire performance with ease of application and environmental responsibility. Its extensive certifications, compatibility with multiple substrates, and cost-saving benefits make it a dependable choice for projects requiring tested passive fire protection.