Kitchen Renovation Plumbing: What to Plan Before You Pick the Tapware
Planning a kitchen renovation in Sydney? Learn how to plan the plumbing, drainage and gas so your new kitchen works as well as it looks.

Kitchen Renovation Plumbing: What to Plan Before You Pick the Tapware
A new kitchen is one of the most exciting home projects you can take on. Most people start with cabinets, benchtops and appliances. The plumbing is rarely on the wish list, yet it decides how well the finished kitchen actually works.
This guide covers the plumbing decisions that are easiest to sort out early, so you avoid costly changes once the walls are closed and the benchtops are in.
Why plumbing deserves a place in the plan
Behind every sink, dishwasher and cooktop is a network of water, drainage and sometimes gas lines. Where they sit determines where your appliances can go. If the plumbing is an afterthought, you can end up with a sink in the wrong spot or a dishwasher with no easy connection.
Talking to a plumber early also helps you set a realistic budget. Moving a sink or adding a new appliance can mean extra pipework, and it’s better to know that before the quotes come in.
Think about the layout first
The simplest kitchen renovations keep the sink, dishwasher and gas connection where they already are. The pipes and drains are in place, so there’s less work involved. Moving the sink across the room is possible, but it can mean cutting into the floor or wall to extend the drain and supply lines.
That doesn’t mean you should avoid changes. A good layout makes cooking easier, and sometimes it’s worth the extra cost. The key is to know what each change involves before you commit to it.
Plan your sink and drainage
Your sink is the hardest-working part of the kitchen. A larger or double sink needs a drain that can keep up, and a waste disposal unit adds another connection to consider. Plumbers also need to check the fall of the drain, which is the slope that lets water run away properly. A drain with the wrong fall can block or drain slowly.
If your kitchen drain has been slow or smelly, a renovation is the perfect time to fix it. The walls are open, access is easy and you can deal with the cause instead of putting up with it. You can read more about blocked drains and how they’re cleared.
Choose your tapware early
Taps look like a finishing touch, but they affect the plumbing from the start. Wall-mounted taps need pipework inside the wall, while a pull-out mixer or a filtered water tap may need extra connections under the sink. Some taps also need a minimum water pressure to work well.
Decide on your tapware before the plumber does the rough-in, which is the first stage of work where the pipes are positioned behind the walls and under the floor. If you change your mind later, you may have to cut into new tiles or cabinets. For help with fittings, see tap repairs and installs.
Dishwasher, fridge and other appliances
Each appliance has its own plumbing needs. A dishwasher needs a water supply, a drain connection and a power point nearby. A fridge with an ice or water dispenser needs a water line. Make a list of every appliance you plan to install, and share it with your plumber and your kitchen designer.
Check the manufacturer’s installation guides too, because some appliances have specific requirements for hose lengths, pressure or clearance. It’s easier to plan for these at the start than to fix them after the cabinets are in.
Don’t forget the gas
If you’re installing a gas cooktop or oven, the gas connection needs careful planning. In NSW, gas fitting must be done by a licensed gas fitter, and the work has to meet Australian standards. You can check a licence on the NSW Fair Trading website.
If you smell gas at any point, leave the building straight away, avoid switches and flames and call your gas emergency line from outside. Don’t try to find the leak yourself. For more on testing and repairs, see gas leak detection and repair.
Check your water pressure and hot water
A new tap or dishwasher won’t perform well if your water pressure is weak. Before you buy, ask your plumber to check the pressure and make sure your hot water supply can keep up. Long pipe runs from the hot water system can also mean a wait before the water gets hot, which wastes water and patience.
If your hot water system is old, a renovation is a good moment to review it. A bigger kitchen and a busy household put more demand on the system. Take a look at hot water systems to see the options.
Get the order of work right
A kitchen renovation involves several trades, and the order matters. In simple terms, demolition comes first, then the plumbing, gas and electrical rough-in. After that come the wall linings, cabinets and benchtops, and finally the plumber returns to connect the sink, taps and appliances.
Delays often happen when trades are booked in the wrong order or when decisions are made late. A good plumber can tell you when each stage is ready, and what has to be finished before the next trade can start. It’s wise to allow a little extra time for surprises.
Strata, renting and approvals
If you live in an apartment, check your building’s rules before you start. Strata schemes often need approval for renovations, and they may limit the days and hours when noisy work is allowed. Shared pipes and stacks may also belong to the owners corporation, so talk to your strata manager first.
If you rent, don’t change the plumbing or gas without the landlord’s written permission. It’s also worth keeping records of any approvals you receive.
Ask the right questions
Before you hire a plumber, ask whether they’re licensed for the work, and request a clear written quote. Find out what’s included, what happens if something unexpected turns up behind the walls and who to contact after the job is done. A good plumber will explain the plan in plain English and won’t rush you into a decision.
Final thoughts
A kitchen renovation looks best when the plumbing is planned as carefully as the cabinets. Think about the layout, drainage, tapware, appliances and gas early, and you’ll avoid most of the costly surprises that catch people out.
If you’re planning a kitchen upgrade in Sydney, Radiant Plumbing is a licensed plumbing and gas fitting company that covers kitchen renovations and other plumbing services across Greater Sydney. You can get in touch online or call (02) 8866 1322.
Comments (0)